|
|
| |
MCI033/MCI050 Series
1/3 and 1/2 HP Cast Iron Submersible Sump Pumps |
Download
Product Brochure
Download Product Manual |
 |
Features
and Benefits
• |
2-pole switch design allows for operation in sump diameters of 10" or more |
• |
Rugged, oil-cooled motor provides continuous bearing lubrication and maximizes heat dissipation |
• |
Lubricated ball bearings and shaft seal for longer service life |
• |
Shaded pole motor eliminates failure-prone switches and relays |
• |
Long-life carbon/ceramic seal protects motor against water leakage |
• |
Heat sensor overload protection with automatic reset when motor cools to safe operating temperature |
• |
Anti-airlock hole in base reduces added labor |
|
• |
Pump, intake screen volute base, switch and power cord are serviceable |
|
| APPLICATIONS: BASEMENT SUMPS, DEWATERING, LIGHT EFFLUENT, WATER TRANSFER |
Specifications
Capacities:
MCI033
MCI050
|
48 GPM
62 GPM
|
182 LPM
235 LPM
|
| Shut-Off Head: |
24 ft. |
7.3 m |
| Operation: |
On: 9" (229 mm)
Off: 4" (102 mm) |
| Operation: |
Automatic |
| Solids Handling: |
1/2 in. |
12.7 mm |
| Liquids Handling: |
drainage effluent |
| Continuous Liquid Temp.: |
130°F |
54°C |
| Motor Eletrical Data: |
1/3 HP, 9.8A; 1/2 HP, 12A; shaded pole with thermal overload
protection, 115V, 1Ø, 60Hz,
1550 RPM |
| Acceptable pH Range: |
6–9 |
| Discharge, NPT: |
1-1/2 in. |
50.8 mm |
| Housing/Volute: |
heavy cast iron |
| Power Cord: |
10 ft. (3 m), 16/3, SJTW-A, SJTW |
| Impeller: |
fiberglass-reinforced Noryl®
with threaded brass insert |
| Volute Base: |
fiberglass reinforced polypropylene |
| Shaft Seal: |
carbon & ceramic |
| Exterior Hardware: |
Stainless Steel |
| Min. Sump Diameter: |
10" (25.4 cm) |
|
Product Performance Chart
|
|
