|
SMNO and SMNC SUSPENDED
MERCURY FLOAT CONTROLS |
|
|
• Available
with normally open or closed contact configurations
• For use with Myers control panels
• Available in 15’ cable lengths
|
| PM15NO
PIPE MOUNTED MERCURY FLOAT CONTROLS |
|
|
•
Available with normally open or closed contact configurations
• For use with Myers control panels
• Available in 15’ cable lengths
|
| MFLC
WIDE-ANGLE MERCURY-FREE MECHANICAL FLOAT CONTROLS |
|
|
•
25’, 18/3 SJOW cord with stabilization weight
• Rated at 3A for 115V or 230V pilot duty use 3-1/3 in. ABS float
• Has 1 each normally opened and normally closed circuit
• Use with CE control panels |
| ALC-18
PIGGYBACK SWITCHES |
|
|
•
Available in 115V or 230V plug configurations
• Handles up to 1/2 HP-115V or 1 HP-230V single-phase pumps
• Pump down range adjustable by moving weights to desired levels
• Standard wiring is normally open, but can be wired closed
• AWS-1 and AWSU-1 versions have built-in connection boxes |
| 20VM
SJE VERTICAL MASTER™ PUMP SWITCH |
|
|
•
Piggyback plug with 20’ cord length
• Available in 115V or 230V plug configurations
• Rated at 13A for 115V or 230V, single-phase use
• Stainless steel pipe mounting bracket
• Vertical pumping range of 3/4 in. to 6-1/2 in. |
| MFS
SERIES |
|
|
•
Environmentally friendly mechanical switching uses no mercury
• Time-proven, dependable, snap- action switch is activated by rolling ball
and double lever arm; you can hear it operate
• No mercury to ball or separate, no inert gas precharge to lose
• Wide-angle operation can be adjusted to give variable draw-off
• Heavy-duty rated 1/2 HP, 115V or 230V
• Series tap plug allows manual or automatic piggyback operation |
| Accessories |
| SA-1/OSA-1
SUMP ALARMS |
|
|
• Installs in minutes
• Quick-connect terminal block
• Corrosion-resistant construction
• Indoor: NEMA 1 enclosure; Outdoor: NEMA 4 enclosure
• Audible and visual
(OSA-1) alarm
Includes three power mods:
• Works during power failure (Model SA-1 only)
• 120V power source
• 9V power source (Model SA-1 only) (battery not included)
• 120V with 9V back-up (Model SA-1 only)
Download
the brochure |
| CA-SS4
ALARM AND CONNECTION BOX |
|
|
• NEMA 1 enclosure; with audible
alarm,
off/on test switch
Download the owner's manual |
| SIMPLEX,
DUPLEX STRUCTURAL FOAM JUNCTION BOXES |
|
|
• Tethered
cover and encapsulated screws; with cord grips, sealing compound and adhesive |
| IRON
CAULKING AND COMPRESSION-TYPE HUBS |
|
|
• Available
for 4in. and 6in. cast iron and PVC pipe |
| FLEXIBLE
RUBBER INLET HUBS (not shown) |
|
|
• Available
for 4 in. and 6 in. PVC pipe (Specify Schedule 40 or SDR 35) |
| DISCHARGE
AND CONDUIT FLANGES |
|
|
•
Available for 4 in. and 6 in. cast iron and PVC pipe
|
| Check
Valves |
| CV-150 |
|
|
• Thermoplastic
check valve with reversible connection sleeves for adapting to 1-1/4 in. or
1-1/2 in. pipes. |
| CV-200P and CV-300P |
|
|
• Compression-type
2 in. and 3 in. check valves
|
| CV-200 and CV-300 |
 |
• Cast iron 2 in. and 3 in. check valves with NPT threaded connections |
|
Basins
and Covers |
|
Size range meets many pump
applications. |
|
|
• Size range meets many pump applications
•
18 in. x 30 in. structural foam basins; cast iron or flexible inlet hubs; one- or
two-piece structural foam covers; 2 in. or 3in. discharge, 2 in. or 3 in.
vent
• 18 in. x 30 in. polypropylene basins; steel one- or two-piece covers; 2 in.
or 3 in. discharge,
2 in. or 3 in. vent; 4 in. cast iron or flexible inlet
hubs
• IAPMO-approved
• 24 in. x 36 in. and 30 in. x 48 in. FRP fiberglass basins
• Steel cover with separate
simplex or duplex pump covers; 2 in. or 3 in. discharge, 2 in. or
3 in. vent |
| |
