Myers ME Series - 1/2 HP through 1-1/2 HP Effluent Pumps

Water Systems, SSE, Residential Centrifugal - 293 Wright St. Delavan, WI 53115 • Ph: 888-987-8677 • Fax: 800-426-9446
Canada - 269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5 • Phone: 519-748-5470 • Fax: 519-748-2553

Price Sheets

	DU25
	MCU15/MCU15S/MCU20S Series
	MES106
	SPS-6
	MUSP125

	DS Series
	ED-25 Sink Pump System
	ED33 Series
	MCSP Series
	MDC33/MDC50 Series
	S33 Series
	S40HT
	S50HT Series
	SP25 Series
	SP75 Series
	SSM33I Series
	SX50 Series
	PSB1822
	MCI033/MCI050 Series

	MBSP Series
	MBSP-Plus Series

	2NFL and J-BE Series
	DE Series
	MD Series
	ME Series
	ME3 Series
	ME40
	P50 and P100 Series
	ME45 Series NEW

	CMV5
	DSW Series
	MW Series
	MW50
	SRM4
	WHR Series
	WHR5H-WHR20H Series

	CMV1830
	CMV-BP
	SRM-BP
	MW-BP
	MRJ
	SR1830

	MRG20
	MRG20 Grinder Pump Systems
	MRGD200 & MRGD200-Retrofit
	MRGD300 / MRGD500 / MRGD750 Series
	Turnkey Simplex Basin Package

	3MW Series
	3WHV Series

	PRO-Source™ K-Series
	PRO-Source™ PLUS KS-Series
	PRO-Source™ PLUS KSS-Series
	Submersible Motor Controls

	PRO-Source™ Steel Pressure Tanks
	PRO-Source™ Epoxy-Lined

	EPC Series
	Pro-Source™ Pumper
	Control Panels, Float Controls, Alarms, Check Valves & More
	Electric Controls
	Lift-out Rail System

ME Series
1/2 HP through 1-1/2 HP Effluent Pumps

Download Product Brochure

Download Product Manual

Features and Benefits

•	High-efficiency, two-vane, enclosed impeller provides ideal performance for efficient dosing
•	Impeller passes full 3/4” solids
•	Enclosed impeller design eliminates the possibility of jamming or corrosion between impeller and volute
•	Oil-filled motor for maximum heat dissipation and constant bearing lubrication
•	High-torque, permanent split capacitor (PSC), single-phase motors; no starting switches or relays to wear out
•	Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
•	Motors have a winding current and temperature-sensitive overload (single phase only)
•	Volute seal ring is replaceable; restores pump to original performance if wear should occur
•	Motor is held in place by 4 screws; easily removed if service if ever needed

IDEAL FOR USE IN MOUND AND TRENCH PRESSURE DISTRIBUTION SYSTEMS. DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE.

Product Capabilites

Capacities:	120 GPM	454 LPM
Shut-Off Head:	95 ft.	28.9 m
Max. Spherical Solids:	3/4 in.	19 mm
Liquids Handling:	domestic effluent and drain water
Intermittent Liquid Temp.:	up to 140°F	up to 60°C
Motor Electrical Data:	1/2 HP, 115V, 1Ø, 1/2 to 1-1/2 HP, 230V, 1Ø, 208/230/460/575V, 3Ø, oil-filled, permanent split capacitor type, 1Ø, 3450 RPM, 60Hz
Acceptable pH Range:	6–9
Specific Gravity:	.9–1.1
Viscosity:	28–35 SSU
Discharge, NPT:	2 in.	50.8 mm
Housing:	cast iron
Min. Sump Diameter: Simplex Duplex	24 in. 36 in.	61.0 cm 91.4 cm
Power Cord:	10 ft.

Product Performance Chart

	SWPA
	SSPMA
	PDF Reader Download


Copyright © The Pentair Pump Group All Rights Reserved Privacy Policy - Terms and Conditions of Use By using this site, or by accessing any information on this site, you are agreeing to the Terms and Conditions.