| |
MRG20
2 HP Single Seal Grinder Pump for Residential
Applications |
|
 |
Features
and Benefits
|
• |
Oil-filled motor for maximum heat dissipation and constant
bearing lubrication |
|
• |
Recessed
impeller reduces radial bearing loads and increases bearing
life |
|
• |
High-torque
capacitor starts single-phase motor for assured starting under
heavy load; no external capacitor needed |
|
• |
Heavy-duty
2 HP listed, wide-angle float switch |
|
• |
On-winding
current and temperature-sensitive overload |
|
• |
Designed
for easy maintenance |
|
• |
Shredding
ring and grinder impeller are replaceable without dismantling
pump or motor (440 Stainless Steel, 58-60 Rockwell) |
|
• |
300
Series Stainless Steel fasteners |
|
|
| THE MRG20
SERIES FEATURES A PATENTED CUTTER MECHANISM AND RECESSED IMPELLER
DESIGN TO EFFECTIVELY MACERATE TYPICAL SEWAGE SOLIDS INTO FINE SLURRY.
ITS DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE. |
Product Capabilites
| Capacities: |
45 GPM |
170 LPM |
| Shut-Off Head: |
105
ft. |
32
m |
| Liquids
Handling: |
raw sewage |
| Intermittent Liquid Temp.: |
up to 140°F |
up to
60°C |
| Winding: |
311°F |
155°C |
| Motor Electrical Data: |
2 HP, 3450 RPM,
1Ø - capacitor start/run 230V;
60Hz, 15A |
| Acceptable
pH Range: |
6–9 |
| Discharge, NPT: |
1-1/4
in. |
31.75 mm |
| Sump
Diameter Duplex: |
36 in. |
91.4 cm |
| Motor Housing:
|
cast iron |
| Impeller: |
eng. thermoplastic |
| Power Cord: |
20 ft. |
| Shaft
Seal (Optional): |
carbon & ceramic tungsten carbide |
| Pump, Motor Shaft: |
stainless steel (416 SS) |
Minimum
Sump Diameter:
Simplex
Duplex |
24 in.
36 in. |
61.0 cm
91.4 cm |
|
Product Performance Chart
|
| |
|
